Adjustable Triangle Rack mounting system is designed to meet the requirement of adjustable tilt angle of the bracket. This mounting system can be installed on both metal roof and flat concrete rooftop. The main parts are Adjustable Triangle Rack, Rail, Rail Connector, Rail Clamp, Mid Clamp and End Clamp.
INSTALLATION STEPS
1.Unfold the pre-assembled Adjustable Triangle Rack, adjust the length of the side column according to the required optimal tilt angle, then lock the bolt tightly; ①If it is trapezoid metal roof, install the Adjustable Triangle Rack on the rooftop in the correct position as planned, drilling the screw into the roof beam below. ②If it is non trapezoidal metal rooftop, install the Clip Lock on the rooftop first then install the Adjustable Triangle Rack on the Clip Lock. ③If it is flat concrete rooftop, install the Adjustable Triangle Rack on the rooftop directly with the expansion bolt, or install them on the cement block through embedded bolt. 2. Install the Rail on the Adjustable Triangle Rack with the Rail Clamp, lock the bolt tightly and make sure all Rails are in same level. 3.Install the solar panel on the Rails with the End Clamp and Mid Clamp, lock the bolt tightly.
English
简体中文
日本語
